Scope Of Delivery; Safety Remarks - HEBU medical GOLD II Mode D'emploi Et De Service

Oscillo-Saw GOLD II

1 Scope of delivery

HB 8894 HEBU oscillating cast cutting saw GOLD II
HB 8895-02 Circular saw blade, dia. 50 mm, x-bite
HB 8896-02 Circular saw blade, dia. 65 mm, x-bite
E 8894-01 2x fork wrenches
Operating instructions

2 Safety remarks

All safety remarks in these operating instructions are marked with the symbol
Before using the saw, carefully read through these operating instructions and the
!
valid national occupational safety regulations and act accordingly.
Please keep these operating instructions for later reference and always include them if
the device is sold or passed on to third parties.
!
Application in accordance with the intended application:
This device is intended for sawing open plaster casts.
!
Never rivet or screw signs or symbols onto the device, as this can render the
protective insulation ineffective. We recommend using adhesive signs.
!
Only ever use undamaged plugs and cables.
Check cables and plugs regularly.
!
The mains voltage and specified voltage rating shown at the device must be in
agreement.
!
Only ever use original accessories.
!
Wear personal protective gear such as protective goggles,
ear protectors and gloves.
!
The device must not be operated in areas at risk from explosion.
EN
!
.
17