Guarantee Conditions; Technical Data - Dennerle Einweg 300 Space Notice D'emploi

5.8 Adapter for reusable CO
• Unscrew the adapter for disposable cylinders with spanner SW
©
30
• Screw in Dennerle adapter (art. no. 2998) for reusable
cylinders (connection thread W21.8 x 1/14") with 6 mm Allen
key, tighten firmly. ©
31
6 What if ... – Troubleshooting
Fault Cause
A faint hissing sound
Pressure reducer is skew
is to be heard at the
or has not been screwed
screwed connection
in tight enough.
between pressure
Washer dirty or faulty.
reducer and CO
2
cylinder.
Adapter is loose
No more bubbles at
Solenoid valve closed
the CO diffusor.
CO cylinder empty
2
2
Setting knob closed
Hose connection
leaking
Needle valve blocked
CO bubbles stuck in
Flipper is still in the
2
the Flipper.
running-in phase.
Obstacles on the
channels (snails,
algae).
Gas escaping from
Flipper not installed in
the side of the
vertical position.
collector.
Waste air vent (slit)
soiled.

7 Technical data

Maximum permissible cylinder pressure (operating pressure): 160 bar
Connection for hose 4/6 mm
Dynamic Valve Control (DVC) for precision control
Factory-calibrated precision needle valve with stainless steel needle,
adjustable via ultra-fine thread
Self-closing pressure-relief valve
Transformer: 230 V~ / 50 Hz
Integrated solenoid valve 9 V
Power consumption: 3 W
Mains lead length: 1.40 m
cylinders
2
Remedy
Unscrew pressure redu-
cer and screw back in
place without canting.
Clean sealing surfaces,
or replace washer if
necessary
Screw in the adapter
firmly
Open solenoid valve
Replace the CO
2
cylinder
Open setting knob
Check hose connection,
replace if necessary
Clean and recalibrate
the needle valve.
Await end of
running-in phase.
Clean.
Fit Flipper in an
upright position.
Clean.
8 Spare parts and useful accessories
(available from specialist retailers)
3013 Disposable CO
2
3019 Disposable CO
2
3047 Reusable CO cylinder, 500 g
2
2998 Adapter for reusable CO
1484 Leak detector spray
3060 Special Softflex CO
3053 Special CO check valve
2
3040 CO long-term test Correct
2
2970 Profi-Line CO solenoid valve
2
3093 pH controller Evolution Deluxe

9 Guarantee conditions

Guarantee period: 4 years from date of purchase.
When submitting guarantee claims, please send the equipment to
Dennerle's Customer Service department together with the
receipt providing proof of purchase.
The guarantee covers manufacturing and material defects. Defective
parts will be replaced or repaired free of charge during the guaran-
tee period, provided that the equipment has been used only in the
correct manner and for the intended purpose.
During the guarantee period, the device may only be opened by
Dennerle's Customer Service personnel, otherwise the guarantee
coverage will lapse.
No claims shall be assertible beyond the value of the device, e.g. for
damage to fish or plants.
We reserve the right to carry out technical modifications.
Sales / distribution: DENNERLE GmbH, D-66957 Vinningen, Germany
Customer Service: DENNERLE GmbH, Industriestraße 4,
D-66981 Münchweiler, Germany
www.dennerle.eu
cylinder 500 g
cylinder 850 g
cylinders
2
hose, 2 m
2
16