Horizontal Termination With Two Elbows One 90° Vertical And One 90° Or 45° Horizontal Elbow - Travis Industries Tree of Life Manuel D'utilisation

Horizontal Termination with Two Elbows
(
one 90° vertical and one 90° or 45° horizontal elbow
L'embout doit obligatoirement se trouver dans la zone hachurée du tableau. Utiliser les positions
indiquées pour les restricteurs et le diffuseur.
19' max (5.8m)
15 feet (4.5m)
10 feet (3m)
5 feet (1.5m)
0 feet
© Travis Industries
Fonctionnement
Position # 5
Restrictor
Position # 1
NOTE:
Horizontal sections require a 1/4" (0.250mm)
rise every 12" (305mm) of travel.
NATURAL GAS: Min. 2' (0.61m) Section Required
PROPANE (LP): Min. 3' (0.915m) Section Required
Horizontal Elbow
Horizontal elbows are elbows placed between
two horizontal sections of pipe. One 45° or 90°
horizontal elbow is allowed for this configuration.
4100326
)
Restrictor
NOTE:
Restrictor positions are based upon lab
tests. The ideal restrictor position may vary
slightly, especially when the termination is
near a demarkation line.
13
19' max (5.8m)
15 feet (4.5m)
10 feet (3m)
5 feet (1.5m)
0 feet
100-01250_000