Kenwood DNX9990HD Mode D'emploi page 9

Number Name
fi (Reset)
1
ATT
2
∞, 5 (Vol)
3
AUD
4
NAV
5
MENU
6
TEL
7
0 (Eject)
8
Remote
9
Sensor
Disc insert
10
slot
SD card slot
11
* The display may not switch to the Graphic Equalizer screen in some conditions.
If the unit or the connected unit fails to operate properly, the unit returns
to factory settings when this button is pressed (Instruction Manual
P.107).
If the SI function is turned on, this indicator flashes when the vehicle
ignition is off (Instruction Manual P.80).
Switches attenuation of the volume on/off.
Pressing for 1 second stores the tag data of the current music from HD
Radio tuner or SiriusXM (Instruction Manual P.56).
Adjusts volume.
Displays Graphic Equalizer screen (Instruction Manual P.94).*
Pressing for 1 second switches camera view display on/off.
Displays the navigation screen.
Pressing for 1 second switches AV out sources.
Displays the Top Menu screen (Instruction Manual P.11).
Pressing for 1 second turns the power off.
When the power off, turns the power on.
Displays the Hands Free screen (Instruction Manual P.62).
Pressing for 1 second displays the Screen Control screen.
Ejects the disc.
When the panel is opened, pressing closes the panel and pressing for 1
second ejects the disc forcibly.
When the panel is closed, pressing for 1 second fully opens the panel to
the location of the SD card slot.
Receives the remote control signal.
A slot to insert a disc media.
An SD card slot for upgrading the map. For how to upgrade the map, refer
to the instruction manual of the navigation system.
9
EN
Motion
DNX9990HD