Table Des Matières; Introduction - Novoferm NovoDock L330 Notice De Montage

Contents
1. Introduction ........................................1
2. General instructions ...........................2
3. Site provisions (third party supply) .....4
4. Preparations for installation ..............5
5. Installation instructions, frame CX ....6
6. Electrical connections ........................8
7. Final installation actions ..................10
8. Option: Docking buffers ....................11
9. Frame AX...........................................12
10. Frame BX ..........................................13
11. Frame DX ..........................................14
12. Frame EX ...........................................15
13. Frame FX ...........................................16
14. Commissioning .................................17
Notes ................................................90
Copyright ..........................................92

1. Introduction

Dear customer,
Thank you for choosing a Novoferm
product. We hope that you are satisfied
and that the product meets all of your
expectations.
Proper operation and maintenance
significantly increase the performance and
lifespan of the leveller. Operator errors
and poor maintenance will inevitably result
in malfunctions. In addition, reliable and
safe operation can only be guaranteed if
the unit is operated properly and
conscientiously maintained.
This installation manual must be given to the customer and kept safely during the entire period of use!
Note the following:
Depending on the choice of accessories,
the scope of supply may include
additional installation manuals, for
example for the leveller control unit.
Please read these manuals carefully and
completely. Please observe the
instructions and comply with all safety
notices and warnings.
++ WARNING +++ WARNING +++ WARNING ++
EN
1