JVC KW-NT500HDT Manuel D'instructions page 84

System settings items
Menu items
Antenna Remote
Camera Input
AV Input
Front AUX Input
Beep
Shortcut Button
Security Indicator
Restore Factory Default
Demonstration Mode
* Not selectable when the input is selected as the source.
Selectable settings
Auto: Antenna remote output is always on.
Manual: Allows user to turn on/off antenna remote output.
(☞ page 13)
The setting varies depending on the installation settings (☞ page 11).
On, Off (☞ page 108)
You can determine the use of the LINE IN and VIDEO IN jacks.
AV: Select when connecting an AV component such as a camcorder.
Audio: Select when connecting an audio component such as a portable
audio player.
Off *: Select when no component is connected. When set to Off, <AV-
IN> cannot be selected.
On: Select when connecting an audio component to the AUX input
terminal on the monitor panel.
Off : Select when no audio component is connected. When set to Off,
*
<Front AUX> cannot be selected.
On: Activates the key-touch tone.
Off: Cancels.
Displays the screen to assign your most frequently used features to
shortcut buttons. (☞ page 13)
If you enable the security indicator, it flashes when the unit is turned off
as an antitheft measure.
On, Off (☞ page 10).
Initialize all settings you have made. Press [Restore] to initialize the
settings.
• When restoring the settings, adjust the settings on installation
setting screen (☞ page 11).
This setting will be deactivated and disappear from the menu when the
System detects the first car movement.
On, Off
84
Initial: Underlined