Bluetooth Device Settings - JVC KW-NT500HDT Manuel D'instructions

Bluetooth device settings

1
Press .
2
Menu items
Phone Connection
Audio Connection
PIN Code
Device Name
Device Address
BT Audio
Auto Connect
Auto Answer
Selectable settings
Connect: ☞ page 100
Disconnect: ☞ page 100
Connect: ☞ page 100
Disconnect: ☞ page 100
Displays the PIN code of the unit.
• To change the PIN code, press [Change], enter a new PIN code, then press [OK].
(☞ page 100)
Shows the device name (JVC Navi) to be shown on the Bluetooth device.
Shows the MAC address of the unit.
On: Select when playing the Bluetooth audio device using "BT Audio" as the source.
Off: Select when playing back iPod/iPhone using "iPod" as the source.
On: The connection is automatically established with the last connected Bluetooth
device when the unit is turned on.
Off: Cancels.
On: The unit answers the incoming calls automatically.
Off: The unit does not answer the calls automatically. Answer the calls manually.
3
107
Initial: Underlined