JVC KW-NT500HDT Manuel D'instructions page 64

iPod/iPhone operations
Caution:
• When you turn on this unit, the iPod/iPhone is
charged through the unit.
However, when connected via a USB hub, the
iPod/iPhone is not charged.
• Do not connect 2 or more USB hubs to the USB
cable of the unit.
• When connecting via a USB hub, connect the
USB hub to the USB cable first, then connect the
iPod/iPhone to the USB hub.
Do not connect the USB hub with iPod/iPhone
connected.
• You can connect USB devices and iPod/iPhone to
the same USB hub.
• If you use a USB 2.0 cable (accessory of the iPod/
iPhone) or a USB hub, do not leave it inside the car.
HUB
iPod
iPod
HUB
Setting the iPod control mode
iPod Control Mode
Head Mode Controls playback from this unit.
iPod Mode Controls audio/video playback from the
iPod/iPhone.
• Playback information is shown.
External Allows any audio/video signals from
Mode iPod/iPhone.
• No information is shown.
Head Mode
iPod Mode
iPod mode indicator appears.
External Mode
External mode indicator appears.
• When using iPod nano (1st Generation), only Head
mode is selectable.
64