Publicité
Les langues disponibles
Les langues disponibles
Ensure the steam iron is correctly placed on the iron support and put the selector switch in
position .
When using in cordless mode, you will need to allow a few seconds for the heat trap system to
heat up/reheat. You will find that you can iron several garments before the steam iron needs
to be reheated. The appliance will function 2 minutes for dry ironing, 1.5 minutes for steam
ironing with constant steam and 1 minute for ironing with burst of steam.
If you want to use the steam iron in corded mode, put it on the base and put the selector
switch to corded mode (position ). If you want to steam iron for a considerable time or apply
numerous shots of steam, it is advised to use the iron in the corded mode.
When you do not use the steam iron, put it in park mode. In this mode, the steam iron is fixed to
the iron support.
FILLING THE WATER TANK
Use preferably demineralised water. If you want to use the steam dial, fill the water tank as
follows:
1)
Put the selector switch of the stand in cordless mode (position ) and take the iron from
the stand.
2)
Put the temperature dial to "MIN/OFF" and the variable steam dial to the OFF setting
3)
To fill the water tank, open the lid of the filling opening and pour water using a measuring
cup. Never exceed the MAX mark indicated on the appliance.
4)
Put the iron back on the stand.
5)
When ironing, unplug the appliance before refilling. Fill the water tank by holding the
appliance in horizontal position without putting down the hot soleplate, unless you have a
heat-resistant base.
TEMPERATURE SETTINGS
You can choose the temperature setting depending on the cloth to iron.
Plug in the iron. Choose the correct ironing temperature by turning the fabric selector
switch. The temperature indicator lights up. Once the desired temperature has been
reached, the temperature indicator lamp will go out.
DRY PRESSING
Turn the variable steam dial to off position
Plug in the iron.
Set the temperature dial for the desired fabric. Always check the label of the garment
before choosing the temperature setting.
Set the iron on its heel rest and wait until the temperature indicator light goes out.
.
.
Publicité
