Exquisit BS3101web Mode D'emploi page 17

metallic or non-metallic surfaces can also
become very hot during use and it is therefore
advisable to always handle them with care and if
possible with the help of isothermal gloves or
other thermal protection. In case of doubt
concerning the temperature of a certain surface it
is always preferable to protect oneself.
(*) Competent qualified electrician: after-sales
department of the producer or importer or any
person who is qualified, approved and competent to
perform this kind of repairs in order to avoid all
danger. In case of need you should return the
appliance to this electrician (www.ggv-service.de).
! BEFORE USING THE IRON, remove any labels from the soleplate and wipe any manufacturing
residue from the soleplate using a soft cloth.
MOUNTING HOOK
At the bottom of the iron support there is a mounting hook that can be used to fix the iron
support to a table or ironing board. Carefully take out the mounting hook from underneath the
support and turn the screw until the support is fixed to the table or ironing board.
STEAM IRONING IN CORDED AND CORDLESS MODE
Your new steam iron is uniquely able to work in both corded and cordless modes.
The selector switch of the iron support allows a precise setting of the desired ironing mode
(park, corded, cordless).

(1)

(2)
Park mode or corded mode: The iron is fixed to the base through the heel.
Set the switch to this position when you do not use the iron or when storing
it. We also advise you to use the iron in the corded position if you intend
to steam iron for a length of time and when you apply numerous shots of
steam, meaning your steam iron works like an ordinary, traditional steam
iron, with the power cord attached to the iron and plugged into the
power supply.
Cordless mode: The steam iron can be used without the cord. In this case,
you take the iron from the stand. The advantage of this mode is that the
cord cannot disturb you during ironing. The soleplate heats up again
when the appliance is back on its base.