Box Contents - Greencut MOTOAZADA GTC180X Manuel D'utilisation

54
TECHNICAL DATA
Engine
Displacement
Power output
Fuel type
Fuel capacity
Type of oil
Oil capacity
Ignition system
Starter system
Transmission
Reducer transmission
Working width
Working depth
Blades
Weight
NOTE: Greencut reserves the right to modify technical data without prior notice.

BOX CONTENTS

This machine includes the following items that you will find inside the box:
-
Machine.
-
Right handlebar.
-
Depth spur.
-
Lower handlebar bar.
-
Transport wheel.
-
Left handlebar.
-
Instruction manual.
• Remove the product and accessories from the box. Make sure all items are present.
• Inspect the product to ensure that it has not been broken or damaged in transit.
• Do not discard the packaging material until you have carefully inspected and satisfactorily used the product.
ATTENTION: If any part is missing or damaged, please contact the Official Technical Service. Do not
use this product without replacing the part. Using this product with damaged or missing parts can
cause serious injury to the operator.
GTC180X
Gasoline 4-stroke OHV
140cc
4.5cv / 3,600rpm
95 lead-free
3,6L
10W30 / 10W40 / 15W30 / 15W40
0,7L
Electronic CDI
EASY-START Manual
By belts
Screw spindle + gear rim
45cm
30cm
Tempered iron
32Kg