Zappiti Signature Guide De Démarrage Rapide page 31

1 2 3 4
19
1 2 1 3 4
1. Balanced XLR Stereo Analog Output
2. Hi-Fi Stereo Analog Output
3. Optical Input
4. Coaxial Input
5. Coaxial Output
6. Stereo Analog Output
7. Analog Video Output CVBS
8. Coaxial Digital Audio Output
9. Optical Digital Audio Output
10. Audio HDMI Output (Audio only)
Programming buttons to control TV or other device
1. Press the SET button on the Zappiti remote control for 7 seconds.
2. The POWER button on the Zappiti remote control turns RED.
3. Press the key of your remote to be programmed on the Zappiti remote control.
4. The POWER button on the Zappiti remote blinks RED.
5. On your remote control, press the button you want to record on the Zappiti remote.
6. The POWER button on the Zappiti remote blinks rapidly and then freezes. The recording is confirmed.
7. Repeat steps 3 through 6 if you want to save other buttons.
8. To finish and save, press the SET button on the Zappiti's remote control. The POWER button will turn off.
Front View
1. LED indicator 4. Front screen panel
2. USB port 5. Headphone Output 6.35mm
3. Power ON/OFF 6. Infrared sensor (IR RC signal)
Rear View
20
5 6 7 8 9 10 11 12
11. Main HDMI Output (Video + Audio)
12. HDMI Input
13. IR IN (IR extenter included)
14. LAN 10/100/1000
15. USB 2.0 Host
16. USB TYPE-C
17. USB 3.1 Host
18. AC voltage switch (110/240V)
19. Wi-Fi Antenna
20. Bluetooth antenna
Français
2
19
13 14 16 17 18
15
29
5
6