Control Functions; Basic Operation; Turning On; Turning Off - OHAUS FD Serie Guide De L'utilisateur

EN-9

3.2 Control Functions

Four multi-function buttons are used to operate the scale.
Button
Primary ON / ZERO
• If scale is off,
Function
turns scale on
(short
press)
• If scale is on,
sets zero
Secondary
Off
Function
If scale is on, turns
(long press)
scale off
Yes
Menu
Function
Accepts current
setting and
advances to the
next menu item
Target
Shifts to next
Setting digit
Function

3.3 Basic Operation

3.3.1

Turning On

With the scale off, press the ON/ZERO Off button. The scale performs a display test, then displays
zero.
3.3.2

Turning Off

With the scale on, press and hold the ON/ZERO Off button until OFF is displayed.
3.3.3 Z e r o i n g
Remove the load from the pan and press the ON/ZERO Off button to set the display to zero. The
Center of Zero indicator turns on when the measurement is within ±1/4 d of the zero setting.
3.3.4

Taring

Semi-automatic Tare (Tare Button)
To store or change the Tare value, place an empty container on the pan and press the TARE button.
The Net weight and NET indicator will be displayed.
To clear the Tare value, remove the container from the pan and press the TARE button. The NET
indicator turns off and the gross weight will be displayed.
G/N/T
Momentarily
Displays
Gross Net and
Tare values
Units
Changes
weighing unit
No
Rejects current
setting or menu
item and
advances to the
next available
item
Increments
value of the
active digit
TARGET
Initiates target
setting mode
Menu
Enters
menu mode
Back
Reverts back to
previous menu
item
Accepts current
displayed value
FD Series
TARE
Sets tare
•
Clears tare, if
•
pan is empty
None
Exit
Immediately
•
exits menu
mode
Aborts
•
calibration
in progress
Changes sign
(+ / -) of
displayed value