Guarantee Conditions; Customer Service; Limitation Of Liability; Copyright - Heiniger XPERT Mode D'emploi

Tondeuse pour moutons
Masquer les pouces Voir aussi pour XPERT:
Table des Matières

Publicité

Les langues disponibles
  • FR

Les langues disponibles

  • FRANÇAIS, page 38
Keep this manual permanently. If you hand on the equipment to
other persons, provide them with this manual.
2.1

Guarantee conditions

The guarantee conditions are included in the general terms and
conditions of the manufacturer.
2.2

Customer service

For technical information, our customer service and our autho-
rised service centres are at your disposal.
Furthermore, our staff is interested in new information and expe-
rience resulting from the operation which could be useful for the
improvement of our products.
2.3

Limitation of liability

All data and information in this instruction manual were arranged
in consideration of the current standards and regulations and
state of the art as well as our realizations and experiences of
many years.
The manufacturer assumes no liability for disadvantages due to:
y Disregarding the operating instructions.
y Non-intended uses of the device.
y Assignment of not instructed personal.
y Technical modifications.
y Use of non-original spare parts.
The actual scope of delivery can differ from specially designed
models, from additional ordering options or due to the latest state
of the art from the here described annotations and illustrations.
2.4

Copyright

This document is protected by copyright. Any kind of reproduc-
tion or copying, in whole or in part, or the reproduction of imag-
es, even when changed, may be performed only with the written
agreement of the manufacturer.
2.5

Symbols used

DANGER!
A WARNING AT THIS DANGER LEVEL DESIGNATES AN IMMINENTLY
DANGEROUS SITUATION.
If the dangerous situation is not avoided, it will lead to death or
serious injury.
To avoid the danger, follow the instructions shown.
X
X
Instruction Manual / Xpert 2-Speed sheep clipper
7

Publicité

Table des Matières
loading

Table des Matières