Verview Presentation; Ser Interface Area - philippi ACE 12V/25A Manuel Utilisateur

O
2.2.

VERVIEW PRESENTATION

The chargers are divided into 2 areas :

The user interface area

The energy conversion area (all maintenance in this area is forbidden except philippi authorization, under
penalty of warranty exclusion)
Fixing of the charger is made by 4 off M5 round head screws (screw head diameter of less than 10 mm) .
Fixing center : see corresponding drawing in the appendices 3 to 5 depending on model.
Fixing by 4 off M5
round head screws
CONNECTIONS :
AC input terminal : WAGO type
WINSTA reference 770-813
U
2.3.

SER INTERFACE AREA

Chargers ACE, 12-25 – See appendix 1
Chargers ACE 12-40, 12-60, 24-20 et 24-30 - See appendix 2
Terminal for temperature probe
TEMP-AL (option)
User interface area
User interface area open screw
(must be screwed to ensure the individual
protection)
DC output terminal :
PHOENIX CONTACT PC 16/4-GF-10,16 for
models ACE 12-25, 12-40, 24-12 and 24-
20.
PHOENIX CONTACT PC35 HC/4-GF-15,00
for models ACE 12-60 and 24-30.
Removable front
cover
21