i-tec C31DUALDPDOCKPD Mode D'emploi page 10

Masquer les pouces Voir aussi pour C31DUALDPDOCKPD:
Table des Matières

Publicité

Les langues disponibles
  • FR

Les langues disponibles

  • FRANÇAIS, page 32
i-tec USB-C Dual DP Display Dock with PD 100 W
If the USB-C/Thunderbolt™ 3 only supports DisplayPort 1.4 without
DSC, the maximum resolution is 2x 2560x1440/60Hz.
If the USB-C/Thunderbolt™ 3 only supports DisplayPort 1.2,
the maximum resolution is 2x 1920x1080/60Hz.
The resolution, the frame rate and the maximum number of connected
external monitors depends on the capabilities of the host PC/laptop.
CONNECTING TO THE LAN
You can use the GLAN RJ-45 port for connecting the Ethernet to a router /
switch and to the internet, it supports speeds of 10 / 100 / 1000 Mbps.
CONNECTING USB DEVICES
The station's USB-A 3.0 and USB-C 3.1 Gen.2 ports can be used to
connect your keyboard, mouse, external hard drive, printer and other
peripherals, or to connect a hub, giving you additional USB ports to use.
CHARGING
The docking station supports charging of USB mobile devices, such as
smart phones, e-book readers, multimedia players, navigation devices,
and tablets.Simply connect the device that you want to charge using the
original cable to the USB port of the docking station. If the device is not
charged, connect the original USB-C power adapter to the USB-C Power
Delivery port of the docking station.
CHARGING THROUGH POWER DELIVERY
The docking station offers USB-C Power Delivery / Data port, designed
for energizing of the connected "parent" device using the original power
adapter and for charging of devices connected through the USB ports. If
you no need charging your devices through Power Delivery, you can use
the port for data transfer.
AUDIO
Audio output devices, for listening through graphic output, need to be
set / verified here: System Preferences-Sound-Output – select USB
Audio Device.
Setting the audio output device to both the earphones and the monitor
simultaneously can be done in Open-Applications-Utilities-Audio
settings MIDI.app – click on „+" on the left at the bottom – Create device
with multiple outputs and select the desired outputs from the offered
options on the Device with multiple outputs.
10 |
ENGLISH

Publicité

Table des Matières
loading

Table des Matières