Indexa VT37SET Mode D'emploi page 22

Mains adapter
Power supply: 100-240 V
Power output: 15 V
Application: indoor use only
5. Equipment
Indoor station VT37M (see Fig. A)
1 monitor
2 door release button
3 monitor OFF button
4 monitor ON button
5 talk button
6 terminals
7 connection for mains adapter
8 cable channel
9 keyhole slot
10 microphone
11 loudspeaker
12 volume regulator
13 colour regulator
14 brightness regulator
15 plug
16 fixing screws
17 wall bracket
18 fixing hole
19 lug
20 mains adapter
Outdoor station VT37C (see Fig. C)
21 cover plate
22 daylight sensor
23 camera lens
24 infrared LEDs
25 microphone
26 loudspeaker
27 doorbell button with nameplate
28 fixing hole
29 terminals
30 slot
31 flush mount housing
32 fixing hole for outdoor station
33 cable hole
34 surface mount housing
35 fixing hole for outdoor station
36 cable hole
37 fixing hole
38 mounting screw
39 plug
40 machine screw
GB - 22
~ AC, 50-60 Hz
"
DC, 1 A
Connection diagram (see Fig. D)
41 electric door release (option)
6. Safety instructions
The following instructions are provided for your safety and satisfaction during
operation of the machine. Note that non-observance of these safety
instructions results in significant risks of accident.
Danger! If this point is not heeded life and health is endangered.
!
Do not leave small children unsupervised with the product, packaging
material or small parts. Otherwise there is a risk of fatal injury due to
choking.
!
Perform the connection and installation while the mains power is
disconnected! Otherwise there is a risk of fatal injury due to electric
shock.
!
Do not damage any gas, electricity, water or telecommunication lines
during drilling and fixing work. Otherwise there are dangers of personal
and fatal injury.
!
Treat the supply lines carefully. Lay these so that they cannot be
damaged and do not present any tripping hazard. Fix the cables
sufficiently. Do not pull the cables over sharp edges and do not crush or
crimp them elsewhere. Otherwise there are dangers of personal and
fatal injury.
!
Do not place the equipment near fire, heat or long lasting high
temperature effects of more than +45 °C. Otherwise there is a risk of
fatal injury due to fire.
!
Do not connect any external voltage to the connection terminals.
Otherwise there are dangers of personal and fatal injury and fire.
!
Use a mains adapter near to the indoor station and keep it easily
accessable.
!
Plug the mains adapter for the mains power connection into the mains
socket completely. Do not touch it with wet hands. Otherwise there is a
risk of fatal injury due to electric shock.
!
Only operate the indoor station and the mains adapter in dry areas. Do
not expose them to dripping or splash water. Only clean the equipment
with a dry and, if necessary slightly moist, cloth. Do not submerge the
equipment in water. Otherwise there is a risk of fatal injury due to
electric shock and fire.
!
Do not connect any damaged device (e.g. transport damage) and
disconnect the power supply immediately in the case of damage.
Unplug the mains adapter from the mains socket. Arrange for the
damage to be repaired immediately by a specialist. Otherwise there is a
risk of fatal injury due to electric shock and fire.
!
Only operate the system with 15.0 V DC from the supplied power supply.
Before connecting the power supply to the mains, ensure that the mains
current complies with 230 V AC, 50 Hz and is fitted with a fuse according
to regulations. Otherwise there is a risk of fatal injury due to electric
shock and fire.
!
Protect the equipment and the cables against strong magnetic or
electrical fields and against strong mechanical loads and vibrations.
!
Only have repairs carried out by authorised and trained qualified