TDK-Lambda FPS3000 Série Mode D'emploi page 32

Les langues disponibles

A/D so that on every read data from each channel is read. Note that on each read. a conversion is started for a particular

channel and the result which will be displayed and will be of the previous read. (i.e. the previous channel).

Thus second read cycle gives result of the actual channel.

Note: the ﬁrst result from a sequence of reads should not be considered.

FPS1000-12/S

0~15V

0~80A

0~100°C

FPS1000-32/S

Model: FPS1000-48 /S

Measurements and calculation examples

Output voltage readback

1. Output voltage (at the output terminals): 48.0V

2. Voltage before the "Oring" diode: 48.0V+0.5V=48.5V

3. Hex readback: CE (1100 1110).

4. Convert the hex readback to decimal: 206

5. Calculate measured Vout: Vout=206*0.2344=48.286V

0.0586 V/Bit

0.312 A/Bit

0.391°C/Bit

FPS1000-24/S

FPS1000-48/S