Basic Operations Of Remote; Loading And Replacing The Battery - Kenwood KDC-C521FM Mode D'emploi

Basic Operations of remote

T.UP/T.DOWN
REP
REP
SCAN
[0] – [9]
SRC
T.
UP
SRC
D.REP
T.
D.REP
DOWN
RDM
RDM
+
DISC
38 / CH SEARCH
–
SCAN
M.RDM
M.RDM/ DIRECT
DIRECT
Function of the KDC-C521FM/ C471FM for the European Market

Loading and Replacing the battery

Use two "AA" batteries.
Slide the cover while pressing downwards to remove it as
illustrated.
Insert the batteries with the
following the illustration inside the case.
2WARNING
Store unused batteries out of the reach of children. Contact a doctor
immediately if the battery is accidentally swallowed.
• The provided batteries are intended for use in operation
checking, and their service life may be short.
• When the remote controllable distance becomes short, replace
both of the batteries with new ones.
• A portion of the operations may not be possible, depending on
the unit that is connected.
Do not set the remote on hot places such as above the dashboard.
Function of the KDC-C521FM/ C471FM for the European Market
Basic operations
[SRC] button
Each time the button is pressed the source switches.
— 15 —
+ –
and poles aligned properly,