Robusta TROPICO Manuel D'utilisation page 14

Operating Instructions
The Juice Extractor is designed to separate juice and pulp.
The pulp container will collect the pulp as the juice flows
through into the juice jug. Always use the attachments
included with this product when extracting juice.
1. Wash your selection of fruit and vegetables and prepare
for juicing by peeling skin, cutting to size etc. Please refer
to our handy hints section on page 7 for further details on
how to get the most out of your Juice Extractor.
NOTE: Always check the stainless steel mesh filter
before juicing for any signs of damage. Never use a
damaged, cracked or bent mesh filter as it may fly
apart causing personal injury.
2.Plug the Juice Extractor in and switch on at the outlet.
3.The LCD screen will turn on.
4.Activate the Juice Extractor by pressing either of the 2
speed setting buttons, LOW or HIGH.
The LCD Screen will illuminate blue, either showing "SLOW"
on low speed setting, or "HIGH" on the high speed setting,
and the timer will commence.
LOW – Use this setting for softer fruits, such as tomatoes,
pineapples, berries, melons etc.
HIGH – Use this setting for harder fruits and vegetables,
such as carrots, apples, celery etc.
5.Place 2 to 3 pieces of fruit into the feeding chute, then
slowly push down with the food pusher.
CAUTION: Never push food into the Juice Extractor
by hand. Always use the pusher. Do NOT insert
fingers or other objects into the Juice Extractor
while it is operating.
NOTE: If a piece of food becomes lodged, use the
pusher to attempt to dislodge. If this does not
work, then turn off the Juice Extractor, unplug
it from the electrical outlet and disassemble the
product to remove.
6.Continue until the desired quantity of juice is reached.
Ensure you do not exceed 900mL of juice in the juice jug to
prevent overflow.
7.To pause or cease juicing, press the STOP button. The
LED Backlight will switch off when you press STOP but the
Juice Extractor will still be on, in stand-by mode.
8.Switch off and unplug from the power outlet.
9.Remove the pulp container and discard the unused pulp.
To continue juicing, place the empty pulp container in
position, plug in and switch on again at the power outlet.
Do not allow the pulp container to overfill. This may affect
the intended operation of the juicer and also cause product
damage in the long term.
10.The froth separator in the juice jug will separate the
froth from the juice when pouring from the juice jug.
NOTE:
Never insert your hand or another object (e.g. a
fork, knife, spoon or spatula) into the feeding
tube.
Only use the pusher supplied with the Juicer for
this purpose.
Wait until the mesh filter has completely stopped
rotating before you remove the lid.
The standard processing time for all juicing jobs is
30-120 seconds. Do not operate the Juice Extrac-
tor continuously for more than three minutes as it
may cause the Juice Extractor to overheat.
A slight burning smell may be emitted during the
first few uses. Do not be alarmed, this is normal.
Handy Hints
•All fruit and vegetables produce different amounts of
juice. This can also vary between one batch of fruit and
another (for example, one batch of oranges may produce
more juice than the next batch). Since j uice recipes are not
exact, the precise quantities of any juice .
•are not crucial to the success of a particular mixture.
•When juicing a variety of ingredients with varying
textures, start with the softer textured ingredients on
low speed then change to high speed for the harder
ingredients.
14
EN