Télécharger Imprimer la page

MAC Audio ZXS 4000 Mode D'emploi/Certificat De Garantie page 8

Publicité

Les langues disponibles
  • FR

Les langues disponibles

  • FRANÇAIS, page 9
FIG. 3
Connect and set the amplifier as shown in Fig. 3 if it is to be controlled by a car radio with stereo output and used with stereo satellite
loudspeakers and a subwoofer.
(1) To the car radio, left output
(2) To the car radio, right output
(3) Left satellite loudspeaker
(4) Right satellite loudspeaker
(5) Subwoofer
FIG. 4
Connect and set the amplifier as shown in Fig. 4 if it is to be controlled by a car radio with stereo receiver and separate subwoofer output
and used with stereo satellite loudspeakers and a subwoofer.
(1) To the car radio, left output
(2) To the car radio, right output
(3) To the car radio, subwoofer output
(4) Left satellite loudspeaker
(5) Right satellite loudspeaker
(6) Subwoofer
FIG. 5
2-CHANNEL MODE
If the amplifier has to generate more power to operate two subwoofers, connect and set it as shown in Fig. 5. The use of the low-pass filter
used is described in Chapter 5.
(1) To the car radio, left output
(2) To the car radio, right output
(3) Subwoofer
(4) Subwoofer
FIG. 6
USE AS AN AMPLIFIER FOR 4 SATELLITE LOUDSPEAKERS AND A SUBWOOFER USING AN ADDITIONAL 1-CHANNEL
AMPLIFIER (ZXS 1000)
(1) To the car radio, front left output
(2) To the car radio, front right output
(3) To the car radio, rear left output
(4) To the car radio, rear right output
(5) Front left loudspeaker
(6) Front right loudspeaker
(7) Rear left loudspeaker
(8) Rear right loudspeaker
(9) Subwoofer
FIG. 7
OPERATING ELEMENTS AND IN/OUTPUTS
(1) Bass booster control (channel 1/2)
(2) HP (high pass filter) / FULL / LP (low pass filter) option switch for channel 1/2
(3) Cross-over frequency control for the low pass (channel 1/2)
(4) Cross-over frequency control for the high pass (channel 1/2)
(5) Channel mode selector switch
(6) Input-level control (channel 1/2)
(7) Outputs for connecting additional amplifiers
(8) Low-level inputs (channel 1/2, front)
(9) Low-level inputs (channel 3/4, rear)
(10) Input-level control (channel 3/4)
(11) Cross-over frequency control for the high pass (channel 3/4)
(12) Cross-over frequency control for the low pass (channel 3/4)
(13) Bass booster control (channel 3/4)
(14) HP (high pass filter) / FULL / LP (low pass filter) option switch for channel 3/4
8

Publicité

loading