Publicité
Les langues disponibles
Les langues disponibles
Inevitably the air intake grille becomes hot when
using the appliance. Make sure the cord does not
come into contact with the air intake grille when
using the appliance.
The air intake and outgoing openings must never
be blocked. However, should the air ventilation
get blocked, the safety device will stop the
appliance immediately. The latter will restart
when it has cooled down. You will have to wait a
couple of minutes.
The safety grille in the air intake opening prevents
the hairs from being sucked in. If you notice after
some time that the grille gets blocked by dust, you
have to clean it. If you don't clean it, the air flux will
progressively decrease and the appliance might
get damaged.
Make sure the hair does not come into direct
contact with the air intake opening.
(*) Competent qualified electrician: after-sales
department of the producer or importer or any
person who is qualified, approved and competent to
perform this kind of repairs in order to avoid all
danger. In case of need you should return the
appliance to this electrician (www.ggv-service.de).
SPECIAL ATTENTION
Your new appliance is designed with a protective coating around the heating coils. When
plugged in and operating for the first time, there may be a little momentary smoking while this
coating is initially heated. This presents no danger to the user and does not indicate a defect in
the unit. When using for the first time, allow the appliance to continue running until the smoke
dissipates. This should last only about 30 seconds.
15
Publicité
