Explanation Of Symbols; Safety And Installation Instructions - Dometic WAECO PerfectView CAM50 Notice De Montage Et D'utilisation

Masquer les pouces Voir aussi pour WAECO PerfectView CAM50:
Table des Matières

Publicité

Les langues disponibles
  • FR

Les langues disponibles

  • FRANÇAIS, page 37
_CAM50.book Seite 24 Montag, 7. Mai 2012 3:12 15

Explanation of symbols

1
Explanation of symbols
WARNING!
!
Safety instruction: Failure to observe this instruction can cause
fatal or serious injury.
CAUTION!
!
Safety instruction: Failure to observe this instruction can lead to
injury.
NOTICE!
A
Failure to observe this instruction can cause material damage and
impair the function of the product.
NOTE
I
Supplementary information for operating the product.
➤ Action: This symbol indicates that action is required on your part. The
required action is described step-by-step.
✓ This symbol describes the result of an action.
fig. 1 5, page 3: This refers to an element in an illustration. In this case,
item 5 in figure 1 on page 3.
2

Safety and installation instructions

Please observe the prescribed safety instructions and stipulations
from the vehicle manufacturer and service workshops.
The manufacturer accepts no liability for damage in the following cases:
 Faulty assembly or connection
 Damage to the product resulting from mechanical influences and excess
voltage
 Alterations to the product without express permission from the manu-
facturer
 Use for purposes other than those described in the operating manual
24
PerfectView CAM50
EN

Publicité

Table des Matières
loading

Table des Matières