Focal PERFORMANCE EXPERT PS 165F Manuel D'utilisation page 7

PERFORMANCE EXPERT
PS 165F/130F - PS 165FX/165F3 - PC 130F/165F
U s e r m a n u a l
Fitting the crossover
Locate the crossovers in a dry, preferably ventilated area, using either the screws supplied or double-sided tape.
To open the box, squeeze the middle on the side, and remove the cover. In some cases, depending on your installation and
the space available, it may be easier to route the cables and connect to the crossover, before securing the crossover to the
vehicle. Please check before.
PS 165FX - PS 165F3
Level adjustment of tweeter and midrange
The toggle switch inside the crossover allows the users to adjust the tweeter level according to their tastes and also to the
speaker location in the car, in order to get the best sound reproduction possible.Too much level in the treble frequencies gives
an aggressive sound and a level lack alters definition and dynamics.
If the tweeter is placed very close to the midbass driver, set it on 0.
If the tweeter is placed on the dashboard or on top of the door and the woofer in the door, set it on -3 ou 0dB.
Tweeter adjustment
0 dB, -3 dB
Woofer adjustment: high/flat
PS 165FX - PS 165F3
PC 130F & PC 165F coaxial kit
This coaxial kit is equipped with an integrated tweeter crossover (6db/oct); please observe the general recommendations
for installation.
Warning: The tweeter post is not adjustable or rotative: it has been designed to be as compact as possible and thus
compatible with as many spaces as possible.
PC 130F
PS 165F - PS 130F
Tweeter adjustment: 0 dB, -3 dB
PS 130F - PS 165F
PC 165F
7