Helite B'SAFE S Manuel D'utilisation page 33

GOOD TO KNOW
 It is possible to pair several "saddle sensors" with one vest (5 maximum).
For example, if you have several bicycles, the pairing process has to be done for
each bike.
 It is possible to pair as many vests as you like with one saddle sensor.
 To check if your vest has recognized the saddle sensor, you just need to place
the magnet on the saddle sensor. A short "beep" on the vest indicates that it is
recognizing the sensor and that they are connected.
STEP 2: INSTALL THE SADDLE SENSOR ON THE BICYCLE
1. Choose the right bracelet size
#1
30mm 34mm
2. Assemble the sensor and the bracelet
• Install the sensor on the bracelet by sliding it
inside. The two arrows have to be aligned.
#2 #3
38mm
User Guide
Try the different sizes.
The right size has to be adjusted to
the bicycle frame. The big screw has
to pass through.
• When the sensor is aligned,
screw in the small screw to fix
the two elements.
This step is
optional if you
want to be able
to take off the
sensor from the
bracelet.
33