Helite B'SAFE S Manuel D'utilisation page 31

THE B'SAFE AIRBAG
The B'Safe package contains: an airbag vest, a saddle sensor, a CO2 cartridge, a USB
cable and a little magnet.
It contains the airbag, a CDU (Crash Detection Unit)
B'Safe vest:
sensor which analyzes the situation in real time (cyclist's motion,
position and speed) and detects accidents.
USB Cable: To recharge the vest battery (see page 40).
CAUTION: only the USB cable is included, you can plug it in
any standard USB charger.
Magnet:
(see page 32 Vest and sensor pairing) and also for
periodic control.
User Guide
SDU saddle sensor (Shock Detection Unit):
It detects shocks on the bicycle. Discreet
and autonomous (life span around 5 years),
it should be installed under the saddle of the
bike (see page 43).
Cartridge: It inflates the airbag in the event
of a fall or an accident. It is for single use
only and must be replaced after each
inflation.
It should be used for the first use of the vest
31