Kenwood KDC-X397 Mode D'emploi page 15

Wiring connection
KDC - 255U
KDC - 155U
R L
Rear/subwoofer output
Antenna terminal
To front speaker (left)
White/Black
To front speaker (right)
To rear speaker (left)
Green/Black
To rear speaker (right)
Purple/Black
Ignition switch
Car fuse box
Red
(Ignition wire)
Yellow
Car fuse box
(Battery wire)
Black (Ground wire)
To the metallic body or
chassis of the car
Battery
KDC - MP255U
KDC - MP155U
R L
Front output
KMR - 355U
Rear/subwoofer output
Fuse (10 A)
KDC - X397
For
To the optional SiriusXM Connect Vehicle Tuner (commercially available) (➜ 8)
If no connections are made, do not let the wire come out from the tab.
White
Light blue/yellow
(Steering remote control
wire)
Gray
Gray/Black
Light blue/yellow
Green
(Marine remote control
wire)
Purple
Blue/White
(Power control wire)
Brown
(Mute control wire)
Blue
(Antenna control wire)
KDC - X397
Subwoofer output
KDC - 355U
Front output
R L
Rear output
KDC - 355U KMR - 355U
/ / :
KDC - X397 KDC - 355U
For /
STEERING WHEEL
REMOTE INPUT
KDC - MP155U
:
REMOTE CONT
To the steering wheel remote control adapter
KMR - 355U
For
:
To Kenwood Wired Marine Remote Control unit
(optional accessory)
MARINE
For the latest information on marine accessories
REMOTE
please go to: http://www.kenwoodusa.com/
Car_Entertainment/Marine/
To the power control terminal when using the
optional power amplifier, or to the antenna control
P. CONT
terminal in the vehicle.
To the terminal that is grounded when either
the telephone rings or during conversation. (To
connect the Kenwood navigation system, refer your
MUTE
navigation manual.)
(Not used)
ANT CONT
Part list for installation
A Faceplate
B Mounting sleeve
C Trim plate
KDC - MP255U
/ /
D Wiring harness
E Extraction key
F Flat head screw
G Round head screw
( ×1 )
( ×1 )
( ×1 )
( ×1 )
( ×2 )
( ×4 )
( ×4 )
ENGLISH | 15