Electrolux Refine 700 Mode D'emploi page 9

FABRIC
Cotton blends
Water-repellent
breathable fabrics
(excluding PVC-coatings)
Wool & Wool blends
Cotton
Corduroy
Linen
Denim
Please follow the instructions of your garment care label.
Varied ironing speed and fabric dampness might cause optimal setting to differ from the recommendations in the
table!
There might be some water drops when the steam boost button is pulled at or
TROUBLESHOOTING
PROBLEM
Soleplate is not heating even
though iron is turned on.
Iron does not produce steam.
Steam boost and vertical
steam boost function does
not work.
Water leaks from the soleplate
during ironing.
Flakes and impurities come
out of the soleplate during
ironing.
Water leaks from the soleplate
while the iron is cooling down
or after it has been stored.
www.electrolux.com
Lavignia_Refine_700_SteamStation_Elux_180918.indd 9
TEMPERATURE SETTING
Outdoor
Outdoor
Wool
Cotton
Cotton
Cotton or Linen
Cotton or Linen
POSSIBLE CAUSE
Connection problem
Temperature setting is lower than
"OUTDOOR" position.
Not enough water in tank.
Selected temperature is lower than
that specified to use with steam.
Steam boost function was used very
frequently within a short period.
Iron is not hot enough.
The iron is not hot enough.
You have used hard water, which has
caused scale flakes to develop in the
water tank. Clean the station with
descaler (see "Cleaning", no 14).
The iron has been put in horizontal
position while there is still water in
the water tank.
IRONING RECOMMENDATION
Check the label and follow the manufacturer's
instructions. Outdoor setting is recommended for this
kind of fiber.
Gently wash and air dry your outdoor garments
according their care label instructions. Carefully and
slowly dry iron the outside to reach all parts of your
garment in order to reactivate the DWR (Durable Water
Repellency) treatment and restore the water repellency
of your outdoor garments, which is better than air
drying only.
Steam iron inside out or use ironing cloth.
Dry iron while still damp or use spray to dampen. Use
maximum steam.
Steam iron inside out or use ironing cloth.
Iron inside out or use ironing cloth to prevent shiny iron
marks, especially with dark-colored fabrics. Dry iron
while still damp or use spray to dampen. Use maximum
steam.
Use maximum steam. Apply maximum steam by
pressing and holding the steam boost button.
.
SOLUTION
Check main power supply cable, plug and
outlet.
Select adequate temperature.
Fill water tank (see "Getting started", no 2).
Increase temperature to at least "
Linen".
Put iron on horizontal position and wait
before using steam boost function.
Adjust the proper temperature to steam
ironing (up to "
vertical position and wait until temperature
indicator light turns off.
Set the temperature dial to a temperature
(" Linen" to maximum) suitable for
steam ironing. Put the iron on its heel and
wait until the headlight is on before you
start ironing.
Press and hold the steam button for about
one minute to get steam. Then hold one
more minute in order to clean the steam
generating system. Before starting ironing,
please test your iron on an old towel to
ensure that no residues inside the iron are
transferred to your garments.
Empty the water tank and set the steam
control to "0" position before storing the
iron.
Linen"). Put iron in
9
2018-09-18 13:30:55
GB
FR
AR
BG
CZ
DE
DK
EE
ES
FA
FI
HR
HU
IT
LT
LV
NO
PL
RO
RU
SE
SI
SK
SR
TR
UA