Publicité
Les langues disponibles
Les langues disponibles
GTA 450
Fit the amplifier in a suitable location, e.g.
beneath the seats or in the trunk (Fig. 1).
The mounting location must also be dry, and
provide sufficient ventilation for cooling of the
amplifier. Use cable grommets when pass-
ing cables through holes with sharp edges.
Use loudspeakers with an impedance of
Ω
2 to 4
(see table or installation drawing).
Observe the max. power handling specifi-
cations (music output). Do not connect the
loudspeakers to ground; only use the termi-
nals provided. The cross-section of the posi-
tive and negative cable must be at least
2
6 mm
.
8
GTA 450 amplifier
The amplifier is suitable for connection to car
radios with Cinch connector. Use the
Blaupunkt ISO Cinch adapter to connect
the amplifier to car radios with ISO con-
nector (7 607 893 093/ 7 607 855 094).
Applications and loudspeaker
connection
Quadro-Mode
Max Power
Stereo-Mode
Max Power
Quadro-Mode
Max Power
Quadro-Mode
RMS Power
Stereo-Mode
RMS Power
Quadro-Mode
RMS Power
Frequency
response
Signal-to-noise
ratio
Stability
Input-sensitivity
Low-pass filter
High-pass filter
Bass Boost
Dimensions
W x H x D (mm)
4 x 100 Watt / 4 Ω
2 x 320 Watt / 4 Ω
4 x 160 Watt / 2 Ω
4 x 50 Watt / 4 Ω
2 x 160 Watt / 4 Ω
4 x 80 Watt / 2 Ω
10 Hz - 30.000 Hz
> 90 dB
2 Ω
0,1 - 8 V
40 - 450 Hz
65 - 450 Hz
0-18 dB
332 x 49,5 x 232
Fig. 3
Fig. 5
Fig. 3
Fig. 3
Fig. 5
Fig. 3
Publicité
