Connector Wiring - Rotronic HYGROMER MP 100 A Mode D'emploi

Time constants at 23°C and 1 m/s air movement:
Adjustment points (potentiometers)
Humidity
100% limit
Temperature
Output signals:
Humidity
Temperature
-MP 101A, 111A
-MPI02A,112A
-MPI03A,113A
Load per output
Supply voltage
- MP 101A, 102A, 103A
MP 111A,112A,113A
-
Max. current consumption
Probe connection
Sensor protection:
Weight

8.1 Connector wiring

Find the plug connection diagram belonging to your probe
Example:
Code for the standard version with 7- pin Tuchel connector: T7
Connection designations
+ Supply voltage + VDC
GND Common ground (-), - VDC
RH Humidity (+)
T Temperature (+)
0 Cable compensation
View of the connection side of the opposite connector
Standard version with 7-pin Tuchel connector
Example: MPI0IA-T7-W4W
Version with 4-pin Tuchel connector
Example: MPI0IA-T4-W4W
Humidity < 10 s Temperature < 15 s
35%,80%, 10%
Hmax
Tmin, Tmax
0...1 VDC = 0...100 %RH
-0.4..+0.6 V DC= -40..+60 °C
0...IVDC = -30..+70 °C
0...IVDC = -40..+60 °C
> 1000 Ohms
4.8...30, VDC
3.6...12VDC
8 mA (4.8...30,0 V DC) 7 mA (3.6...12 V DC)
(Standard) 7-pin Tuchel plug
Wire filter
70 g