Problem With Results - Bosch TAS1102V Notice D'utilisation

Fault
LED flashes.
LED lights up even
though decalcified water has
been used.
LED and
simultaneously lit and the
brewing process is not pos-
sible.
LED and LED flash
simultaneously.

Problem with results

Fault
Crema has deteriorated.
Drink volume has changed.
Drink volume has reduced.
Drink dispensing halts.
Cause
Heavy build-up of limescale
in the appliance.
Decalcified water still con-
tains small amounts of lime.
Appliance has a fault.
LED are
Descaling process is run-
ning.
Cause
Beverage outlet is soiled.
Build-up of limescale in the
appliance.
Build-up of limescale in the
appliance.
Water tank has not been suf-
ficiently filled.
Troubleshooting en
troubleshooting
Descale the appliance.
▶
→ "Descale the appliance",
Page 31
Descale the appliance.
▶
→ "Descale the appliance",
Page 31
Unplug the mains plug.
1.
Contact the TASSIMO careline.
2.
Wait until the descaling process is
▶
complete.
troubleshooting
Clean the beverage outlet.
▶
→ "Cleaning and servicing",
Page 31
Clean the brewing unit with the
▶
T DISC.
→ "Cleaning and servicing",
Page 31
Descale the appliance.
▶
→ "Descale the appliance",
Page 31
Descale the appliance.
▶
→ "Descale the appliance",
Page 31
Fill the water tank with fresh, cold
1.
water up to the mark
Keep pressed until the desired
2.
fill volume is reached.
⁠ .
35