Télécharger Imprimer la page

USP DuraMax 10.5x8 Apex Guide D'instructions page 59

Masquer les pouces Voir aussi pour DuraMax 10.5x8 Apex:

Publicité

3
VRB07
WPA1
VRB07
(EN) Attach each Side Panel (WPA1 ,WPA2 ) on top to the Roof Structure (VRD01,VRB07 & VRB08). Using a dia. 3mm
(1/8") drill with a power drill, make six equal distance holes on the Side Panel through the Roof Structure. Drive a self tapping
screw (S4) through the Side Panel to the Roof Structure. Repeat this for every Side Panel. See blowup.
(ES) Fije cada panel lateral (WPA1 ,WPA2 ) en la parte superior de la estructura del tejado (VRD01,VRB07 & VRB08).
Usando un día. 3 mm (1/8 ") perfore con un taladro eléctrico, hacer seis agujeros a la misma distancia en el panel lateral a
través de la estructura del techo. Introduzca un tornillo auto-roscante (S4) a través del panel lateral a la estructura del techo.
Repita esto para cada panel lateral. Ver ampliación.
(FR) Fixez chaque panneau latéral (WPA1 ,WPA2 ) au-dessus de la structure de toit (VRD01,VRB07 & VRB08). Avec un
foret de 3 mm (1/8'') et une perceuse électrique, percez six trous à égale distance sur le panneau latéral dans la structure de
toit. Insérez une vis auto-fôrante (S4) à travers le panneau latéral dans la structure de toit. Répétez cette opération avec
chaque panneau latéral. Voir le zoom ci-contre.
(EN) Roof Structures
(ES) Estructuras de techo
(FR) Structure Du Toit
(EN) Base 'U'channel
(ES) Base canal 'U'
(FR) Profilé en U
57
(EN) IMPORTANT: USE HAND GLOVES TO PREVENT INJURY.
(FR) IMPORTANT: UTILISER LES GANTS POUR PREVENIR LES ACCIDE NTS.
VRD01
WPA1
VRD01
WPA1
WPA1
S4
S4
(EN) Side Panel
(ES) Panel Lateral
(FR) Panneau De Cote
S4
VRB07
VRB08
WPA1
(ES) IMPORTANTE: GUANTES DE MANO DE USO PARA PREVENIR LA HERIDA.
VRD01
WPA1

Publicité

loading

Ce manuel est également adapté pour:

30116