Mounting Precautions - Sharp PN-L803CA Manuel D'installation

Masquer les pouces Voir aussi pour PN-L803CA:

Mode d'emploi (12 pages)

Table des Matières

Les langues disponibles

• This product is for use indoors.

• A mounting bracket compliant with VESA specifications is

required.

• Since the monitor is heavy, consult your dealer before

installing, removing or moving the monitor.

• Mounting the monitor on the wall requires special expertise

and the work must be performed by an authorized SHARP

dealer. You should never attempt to perform any of this

work yourself. Our company will bear no responsibility

for accidents or injuries caused by improper mounting or

mishandling.

• Use the monitor with the surface perpendicular to a level

surface. If necessary, the monitor may be tilted up to 20

degrees upward.

• When moving the monitor, be sure to hold it with the

handles and the unit bottom. Do not grasp the screen,

tray, speaker, or speaker cover. This may cause product

damage, failure, or injury.

• This monitor should be used at an ambient temperature

between 41°F (5°C) and 95°F (35°C).

• Be careful of high temperatures in the surrounding area.

When installing the monitor inside a housing, or if the

ambient temperature may be outside of the range of 41°F

(5°C) to 95°F (35°C), install a fan or take other measures to

keep the ambient temperature within the required range.

• Temperature condition may change when using the monitor

together with the optional equipments recommended by

SHARP. In such cases, please check the temperature

condition specified by the optional equipments.

• Do not block any ventilation openings. If the temperature

inside the monitor rises, this could lead to a malfunction.

• Do not place the monitor on a device which generates heat.