Manufacturer's Warranty - REMS Akku-LED-Lampe Notice D'installation Et D'utilisation Succincte

eng
3. Operation
Switch on the REMS cordless LED lamp by pressing the On/Off switch (2). Switch off the REMS
cordless LED lamp by pressing the On/Off switch (2) again.
Low discharge protection
The REMS cordless LED lamp is equipped with a low discharge protection. This switches the
REMS cordless LED lamp off as soon as the battery needs recharging. In this case, press the
On/Off switch (2) once, remove the battery and charger with the REMS rapid charger.
4. Maintenance
4.1. Maintenance
WARNING WARNING
Remove the battery before cleaning!
The REMS cordless LED lamp is maintenance-free.
Clean plastic parts (e.g. housing, plastic disc, batteries) only with the REMS CleanM machine
cleaner (Art. No. 140119) or a mild soap and a damp, soft cloth. Do not use household cleaners.
These often contain chemicals which can damage the plastic parts. Never use petrol, turpentine,
solvent or similar products for cleaning plastic parts.
Liquids may never be allowed to penetrate inside the REMS cordless LED lamp. Never immerse
the REMS cordless LED lamp in liquids.
4.2. Inspection/repair
WARNING WARNING
Remove the battery before carrying out maintenance or repair work! This work may only
be performed by qualifi ed personnel.
5. Disposal
The REMS cordless LED lamp may not be thrown in the domestic waste after use. It must be
disposed of properly by law. Lithium batteries and battery packs of all battery systems may only
be disposed of in the discharged state, all contacts of incompletely discharged lithium batteries
and battery packs must be covered with insulating tape.

6. Manufacturer's Warranty

The warranty period shall be 12 months from delivery of the new product to the fi rst user. The
date of delivery shall be documented by the submission of the original purchase documents,
which must include the date of purchase and the designation of the product. All functional defects
occurring within the warranty period, which are clearly the consequence of defects in production
or materials, will be remedied free of charge. The remedy of defects shall not extend or renew
the warranty period for the product. Damage attributable to natural wear and tear, incorrect
treatment or misuse, failure to observe the operational instructions, unsuitable operating mate-
rials, excessive demand, use for unauthorized purposes, interventions by the customer or a
third party or other reasons, for which REMS is not responsible, shall be excluded from the
warranty.
Services under the warranty may only be provided by customer service stations authorized for
this purpose by REMS. Complaints will only be accepted if the product is returned to a customer
service station authorized by REMS without prior interference and in a fully assembled condition.
Replaced products and parts shall become the property of REMS.
10