Important Information For Initial Operation; Operation Instructions - erba 17017 Mode D'emploi

GB - INSTRUCTION MANUAL

7. IMPORTANT INFORMATION FOR INITIAL OPERATION

Check the product for transport any damage. Notify the carrier if you find any transport damage.
Position the compressor as close to the working area as possible to avoid long air hoses and
extension cords.
Intake air must be dry and clean.
After filling the air tank the compressor engine must cool down for 2-5 minutes to avoid over-
heating.
Mounting the wheels (2)
The enclosed wheels have to be mounted according to images B, C and D.
Mounting the stand (9)
The enclosed rubber stands have to be mounted according to image A.

8. OPERATION INSTRUCTIONS

Quick coupling (5)
Connect:
Put the plug of your hose directly into the coupling untill you hear a clicking sound.
Disconnect:
Pull back the sleeve of the quick coupling and pull out the plug.
Adjusting the pressure
Use the pressure regulator (4) to adjust the pressure on the gauge (6). This will regulate the pressure
coming out of the working pressure valve (5).
ERBA GmbH
A-1230 Wien
Talpagasse 6
Servicehotline: Tel: +43(0) 1 930 10 - 160 · Fax: +43(0) 1 930 10 - 960 · E-Mail: service@erba.at
Page 17
Changes, print, punctuation and other errors reserved!
Instruction manual
17017
Issue: 09/2017