Sony CPD-M151 Mode D'emploi page 8

Getting Started
Step 3: Attaching the rear cover
After connecting the computer and power cord, attach the
supplied rear cover.
Make sure that you keep the screen upright when attaching
or detaching the rear cover.
1
Clamp the AC adapter cord.
2
Press the rear cover against the part for attaching
the cover.
8
Align the marking tape of the
AC adapter cord to the clamp,
wind it once and close the
clamp.
Clamp
Marking tape of the
AC adapter cord
3
Turn the screw to fasten the rear cover.
Unlocked
Using the monitor without the stand
Prepare:
Philip's screw driver
Soft cloth to place under the LCD panel
1
Remove the screws from the fixing shaft of the stand.
2
Place the monitor on the soft cloth with the LCD
panel facing down, and pull the stand out from the
monitor.
Locked