Table des Matières
Publicité
Les langues disponibles
Les langues disponibles
• Do not suck up liquids!
• Do not suck up hot ashes or pointed or sharp objects!
• Do not use the device in damp rooms!
• Never use without the filter. Check that the filter is inserted correctly!
• Hair, clothing and body parts away from the vacuum nozzle during
use!
• Keep the vacuum cleaner away from sources of heat like radiators,
ovens, etc.!
Overview of the Components
1 Telescopic suction pipe
2 Slide for telescopic suction pipe
3 Floor nozzle (with hook (not shown))
4 Lever for extending and retracting the brushes
5 On / off button
6 Cover for extraction filter
7 Stowage clip
8 Power cord with plug
9 Cable-winding button
10 Dust bag filling display
11 Connection head of the vacuum hose
12 Hose connection
13 Opener dust bag compartment
14 Suction hose
Start-Up
•
Insert the connection head part of the suction hose into the
hose connector of the device and then turn it clockwise by
a quarter turn.
•
To disconnect the hose, turn it anticlockwise by a quarter
turn and remove it in an upwards direction.
•
Insert the vacuum tube into the handle if required.
•
Then assemble the floor nozzle and/or the accessories.
Nozzle Attachment
Floor Nozzle (3)
The floor nozzle features castors for easier movement.
You can clean smooth surfaces and carpets with the floor
nozzle.
•
Adjust the brushes outwards or inwards using the lever (4).
Best use of the appliance depends on the texture of the floor
covering. We recommend the following use:
•
Use without brushes:
For vacuuming floor coverings with a deep pile
30
•
Use with brushes:
For vacuuming smooth floors and carpets with a shallow
pile
Crevice and Jointed Nozzle
For vacuuming upholstery, curtains and in corners and crevices
etc.
NOTE:
When folded, use it as a crevice nozzle. If you want to use
the brush nozzle, pull the brush tool towards the arrow mark-
ing until it locks into place.
To detach the nozzle attachments from the suction pipe, pull
them off by turning them slightly.
Telescopic Suction Pipe
The length of the telescopic suction pipe can be adjusted
individually:
1. Loosen the locking mechanism by sliding
and holding the button (2) in the direction
of the arrow marking.
2. Extract one tube from the other to the
desired length.
3. Release the button in order to lock the
connection.
Mains Cable
Pull the mains cable from the cable compartment.
CAUTION:
•
Pull out the cable up to the maximum length indicated
with the yellow mark.
•
Never pull the cable out up to the red mark as the cable
winding can be damaged.
NOTE:
If the red mark is visible, pull in the cable with the help of the
cable winding button back to the yellow mark.
Publicité
Table des Matières
