Setting A Parameter - CARLO GAVAZZI EM24 M1 Manuel D'emploi

EM24 M1/M2 use
Step Action
6 In the EnE PrES page, set YES
7 Confirm operation

Setting a parameter

Example procedure: how to set P int. ti=30 and save changes.
Step Action
1 Power on the energy analyzer
2 Press the joystick for at least 3 seconds
3 In the PASS? page, select the correct password (default 0)
4 Confirm operation
5
Scroll pages until
6 Enter the editing mode
7 Select 30
8 Confirm operation
9 Scroll pages until End to exit
8 EM24 M1/M2 - Instruction manual | CARLO GAVAZZI Controls SpA
P int. ti
Button
Button