Philips S95 Série Mode D'emploi page 37

Note: You can also clean the cutter and
the guard with the cleaning brush. Brush
carefully in the direction of the arrows.
5 After cleaning, place the cutter back
into the guard.
6 Put the shaving heads back into the
shaving head holder.
Note: Make sure the notches on both
sides of the shaving heads fit exactly
onto the projections in the shaving-head
holder.
7 Place the retaining ring holder
on the retaining ring (1), place it
on the shaving head (2) and turn
it clockwise (3) to reattach the
retaining ring.
Repeat this process for the other
retaining rings.
ENGLISH
37