Philips S95 Série Mode D'emploi page 32

ENGLISH
32
3 Place the shaver in the holder (1),
tilt the shaver backwards (2) and
press down the top cap to connect
the shaver ('click') (3).
, The battery symbol starts to flash,
which indicates that the shaver is
charging.
4 Press the on/off button on the
SmartClean system to start the
cleaning program.
, During the rinsing phase, the
rinsing symbol will flash.
Note: The rinsing phase takes approx.
10 minutes.
, During the drying phase, the drying
symbol will flash.
Note: The drying phase takes approx.
4 hours.
, When the cleaning program has
been completed, the ready symbol
lights up continuously.
, The battery symbol lights up
continuously to indicate that the
shaver is fully charged.