EUROM Under table heater Mode D'emploi page 11

Caution! Never leave the appliance unsupervised when in use. Do not
24.
use the appliance with a programmer, timer or any other device that
switches the appliance on automatically. Also do not use the appliance
with an external voltage regulator such as dimmer, speed controller
etc. That produces hazard too!
DESCRIPTION
The heater is fitted with a tipping safeguard which automatically shuts off
the appliance if it inadvertently falls over. When the heater is returned to its
upright position, it will resume functioning as normal but, before reusing,
switch off, unplug and check for damage. Do not use the heater if it is
damaged or malfunctioning, but have it inspected/repaired!
OPERATION
Check for every use:
or the appliance doesn't show signs of damage.
-
- Check whether the equipment is on a flat, level and vibration free
surface
- or there are no objects, canvas, sun screens etc. are inside the safety
distances.
- or the socket you want to use gives the correct tension (220-240V-
50Hz). Check whether the socket is earthed and secured with a 30mA
circuit breaker.
If everything is all right you can insert the plug into the socket.
11
Under table heater
1 – Operation button
2 – Support brackets
3 – Carbon lamp
4 – Safety grill
5 – Base