Digital 7100 Série Guide D'installation page 7

5
Turn on the monitor and then the server
Installation Guide
1. Turn on the monitor.
2. Turn on the server.
3. The Operator Control Panel (OCP) display should turn
on by itself. If it doesn't, press the OCP button.
4. Adjust the monitor contrast and brightness to obtain a
readable screen display.
NOTE
Refer to your System Reference manual for BIOS, Power-
on-self-test (POST), and OCP messages.
Front panel switch icons are, from left to right, power,
OCP backlight, and server reset.
7