Product Specifications; Delivery Form; Technical Data - Ivoclar Vivadent VP3 easy Mode D'emploi

9. Product Specifications
9.1

Delivery form

Vacuum pump
Operating Instructions
Warranty Card
9.2

Technical data

Power supply:
Tolerated voltage fluctuations:
Power consumption:
Suction strength:
Final vacuum:
Dimensions: 210 x 140 x 130 mm (length, width, height)
Weight:
Types of fuses:
Safety information :
The VP3 easy Vacuum Pump complies with the following
guidelines:
– EN 61010, Part 1
– EMV tested
– Degree of pollution 2
– Excess voltage class II
9.3 Acceptable operating conditions
Ambient temperature range of:
+5 °C to +40 °C (+41 °F to +104 °F)
Acceptable height:
The pump is tested for use at altitudes of up to
2000 m above sea level. Ambient pressure of 500 mbar to
9.4 Acceptable transportation conditions
Ambient temperature range of:
Maximum relative humidity:
12
230 V / 50–60 Hz / 0.4 A
200 V / 50–60 Hz / 0.45 A
115 V / 50–60 Hz / 0.8 A
16 NL / min.
below 40 mbar
230 V: 1.25 AT 250 V
200 V: 1.25 AT 250 V
115 V: 2.0 AT 250 V
-20 °C to +55 °C (-4 °F to +131 °F)
+/– 10%
70 W
3.2 kg
1060 mbar.
80%
This apparatus has been developed for use in dentistry. Setup and
operation should be carried out strictly according to the Operating
Instructions. Liability cannot be accepted for damages resulting from
misuse or failure to observe the Instructions. The user is solely
responsible for testing the apparatus for its suitability for any purpose
not explicitly stated in the Instructions. Descriptions and data
constitute no warranty of attributes.