Drive Chain Slack Adjustment - Yamaha Breeze Manuel Du Propriétaire

q w
1. Hub stopper bolt
2. Locknut
1. Boulon d'arrêt de moyeu
2. Contre-écrou
1. Tornillo de bloqueo de buje
2. Contratuerca
q
1. Locknut
1. Contre-écrou
1. Contratuerca
e
e
3. Axle holding bolt (×4)
3. Boulon de fixation d'axe (×4)
3. Tornillo de sujeción del eje (×4)
a
b
w
2. Chain adjusting bolt
2. Dispositif de réglage de chaîne
2. Tensor de la cadena
EBU01146

Drive chain slack adjustment

1. Loosen the hub stopper bolt locknut and
then the hub stopper bolt.
2. Loosen the upper and lower axle holding
bolts.
3. Loosen the locknut. To tighten the drive
chain, turn the adjusting bolt in direction a.
To loosen the drive chain, turn the adjusting
bolt in direction b, and then push the
wheels forward.
cC
Too little of drive chain slack will overload
the engine and other important parts. Keep
the drive chain slack within the specified
limit.
4. After adjusting, be sure to tighten the lock-
nut and the axle holding bolts.
8-59