IBEA IBT-500 Notice D'emploi page 23

PREVENTING DAMAGES TO YOUR RUBBER CRAWLERS
Periodically check crawler tension
Prevent objects such as stones, branches, mud, etc. from en-
tering between crawler and gear wheel.
Crawler metal inserts could tear off.
Periodically clean the machine and crawlers.
Dirt (sand, gravel) could enter between crawler and
rollers, causing premature wear.
Prevent traction wheel from coming out of its seat.
Metal core could break.
Do not make sudden turns on hard surfaces (concrete, asphalt).
Crawler wears off prematurely.
Avoid contact with sharp objects.
Crawler metal inserts could separate.
Do not proceed perpendicularly on steps.
Crawlers could tear off.
Minitransporter IBT-500 / H / D / DH
abrasion
separation
rubber profile could be cut
10-15 mm
gear
wheel
crawler
roller
Rubber profile
abrasion
Pag. 23