Sony LMD-2451MT Instructions D'utilisation page 86

Masquer les pouces Voir aussi pour LMD-2451MT:
Table des Matières

Publicité

Les langues disponibles

Les langues disponibles

Submenu
EXT 5V(OUT)
EDID UPDATE
EDID STATUS
3D SETTING
* This setting menu is displayed only when input from BKM-
250TGM or DVI is selected.
* Only 2D/3D SELECT is displayed when DVI input is selected.
* Install BKM-250TGM to display HD-SDI signal in 3D.
* The IN (INPUT)-1 connector on BKM-250TGM can be used for
left signal input, and the IN (INPUT)-2 connector for right signal
input.
* 720/50P and 720/60P signals are displayed in the NATIVE scan
mode.
USER CONFIG – 3D SETTING 1/2
2 D / 3 D S E L E C T :
3 D S I G N A L F O R M AT :
D I S PA R I T Y S I M . :
H O R O P T E R C H E C K :
L E F T :
R I G H T :
F L I P H :
PAY L O A D I D
I N - 1 :
USER CONFIG – 3D SETTING 2/2
2 D / 3 D D I S P L AY:
86
Adjustment Using the Menus
Setting
Selects ON to output external 5 V
power from the DVI output
connectors and OFF not to output.
Downloads the EDID information
from the main unit (the monitor) to
the BKM-256DD. Select "START,"
and then press the ENTER button to
start downloading the EDID
information automatically. During
download, "EDID UPDATING..."
is displayed and the CONTROL
button cannot be operated. When
download finishes correctly,
"COMPLETE!" is displayed. When
a fault occurs, "ERROR" is
displayed. Press the RETURN
button to display the on-screen
menu.
The information downloaded to the
BKM-256DD from the EDID of the
main unit (the monitor) is
displayed.
• MODEL: Model name of the
monitor
• SER.: Serial number of the
monitor
xx
xxxx
xxx
xx
xx
xxxx
xxxx
xxx
xx
I N - 2 :
xx
xx
Submenu
Setting
2D/3D SELECT
Switches between 2D and 3D display
mode.
• 2D: Displays input signals for 2D
display mode.
• 3D: Displays input signals for 3D
display mode.
3D SIGNAL
Selects input signal format for 3D
FORMAT
display.
*
• 3G-B
signals for 3D display mode.
•INTER: Displays 1080/50i or
1080/60i signal.
•PROG: Displays 1080/24P, 25P,
30P or 720/50P, 60P signal.
•PSF: Displays 1080/24PsF or
1080/25PsF signal.
• DUAL: Displays dual-stream HD-SDI
signals for 3D display mode.
•INTER: Displays 1080/50i or
1080/60i signal.
•PROG: Displays 1080/24P, 25P,
30P or 720/50P, 60P signal.
•PSF: Displays 1080/24PsF or
1080/25PsF signal.
• SEQUENTIAL: Displays field
sequential HD-SDI signals for 3D
display mode.
• SIDE BY SIDE: Displays side-by-
side typed HD-SDI signals for 3D
display mode.
•INTER: Displays 1080/50i or
1080/60i signal.
•PROG: Displays 1080/24P, 25P,
30P or 720/50P, 60P signal.
•PSF: Displays 1080/24PsF or
1080/25PsF signal.
• LINE BY LINE: Displays line-by-
line typed HD-SDI signals for 3D
display mode.
• AUTO1: 3D display mode is
automatically selected for 3G
Level-B HD-SDI signals. Other
formats are displayed in 2D
display mode.
• AUTO2: When 3G Level-B 3G-SDI
signals are input, the channel
assign information enables 3D
display mode and 2D display
mode to be automatically
switched.
*
When signals in formats other than
3G-B are input for 3D display mode,
the message "NOT AVAILABLE"
appears.
DISPARITY SIM.
Adjusts the phase of left/right input
signals. You can monitor the depth of 3D
images using simulated 3D effect.
• LR: Shifts the phase of left and right
channels at the same time.
• RIGHT: Shifts the phase of right
channel.
• LEFT: Shifts the phase of left
channel.
: Displays 3G Level-B HD-SDI

Publicité

Table des Matières
loading

Table des Matières