Italiana Camini CLASSICA PLUS Installation, Usage Et Maintenance page 28

fi g. 1
A
G
fi g. 3
fi g. 5
INSTALLATION
A
G
fi g. 2
I
H
fi g. 4
SMOKE OUTPUT
CLASSICA PLUS is designed for the connection of the fl ue at
the top, back of the stove.
Illustration 1 shows how the stove will appear once it has been
unpacked.
The stove is delivered ready for the ouput of the fl ue from the
back (fi g. 1).
To connect the smoke outlet at the top of the stove, proceed as
follows:
Remove the cast iron top (a – fi g. 2)
Remove the elbow pipe from the pipe union of the fl ue then fi t
the fl ue pipe (not supplied) as shown in fi g. 3
AFTER COMPLETING THE CONNECTION OF THE
SMOKE OUTPUT PIPE TO THE FLUE, FIT THE CERA-
MIC SIDE PANELS AS SHOWN ON THE FOLLOWING
PAGE.
Remove the left cast iron from the top (H-Fig.4) replacing it
by the fl ue cover (I-fi g.4) provided, to allow the passage of the
pipe.
- 28
-