Publicité
Les langues disponibles
Les langues disponibles
4. Insert the plug into the wall socket. A red light (5) will come on to indicate that the device is connected to
the mains.
5. Press the Power button (10) to switch on the device. The device switches on with default settings
of 180° Celsius and 15 minutes.
6. If desired, change the temperature by pressing the Temp/Timer button (7) once and then by
pressing + or - (6). The temperature (8) changes in steps of 5° Celsius.
7. If desired, change the cooking time by pressing the Temp/Timer button again and then by pressing
+ or -. The time (9) changes in 1 minute steps.
8. Then press the Start/Pause (11) button to start the cooking process. The timer starts running. The
heating light goes on.
Pause in the meantime
Press the Start/Pause button once to pause the device. The device continues to ventilate for a short while,
and stops heating. The timer pauses. Press the Start/Pause button again to continue the cooking process.
Shake in the meantime
Take out the drawer to shake the food. The device switches off completely. Put the drawer back in the
appliance to continue the cooking process automatically.
Change the time and/or temperature in the meantime
Press the Pause/Start button once. Repeat steps 6 and/or 7 and then press the Start/Pause button again
to continue the cooking process.
The timer will give a signal when the set time has elapsed. The device stops heating and switches itself off
completely.
9. Pull the drawer out of the appliance by the handle and place it on a plate.
10. Press the release button and take the frying basket out of the drawer.
11. Place the prepared food on a plate or dish.
12. Then remove the plug from the socket when you are no longer going to use the appliance.
WARNING:
•
Do not press the release button when taking the tray from the appliance.
•
Never fill the frying basket beyond the MAX indication.
•
It's recommended to pre-heat the appliance for three minutes without any foods if the appliance is still
cold.
•
It is recommended to occasionally take out the frying basket and shake the food around a bit to make
sure it's being properly browned on all sides.
•
Do not touch the tray and frying basket, they can become very hot. Take precautions against burns. Use
a coaster or something similar when taking out the tray.
CLEANING AND MAINTENANCE
Clean the appliance and its loose parts thoroughly after each use.
1. Remove the plug from the wall socket.
2. Let the appliance cool down.
3. Take the tray from the appliance.
4. Press the release button and take the frying basket out of the tray.
5. Remove remaining food parts by wiping them off with absorbent paper towels.
6. Clean the tray and frying basket thoroughly with hot water, dishwashing soap and a non-grating sponge.
The tray and frying basket can also be cleaned in a dishwashing machine. Dry them off thoroughly after
cleaning.
7. Clean the housing with a moist towel, if need be with some dishwashing soap added to it. Dry it off
thoroughly after cleaning.
8. Reassemble the parts.
9. Convenient: You can slide the entire cable through the opening in the device.
10. Store the appliance in a dry place.
WARNING:
•
Verify that the appliance is not connected to the power supply before you clean it.
•
Never use corrosive or scouring cleaning agents or sharp objects (such as knives or hard brushes) to
clean the appliance.
•
Never immerse the heating element unit in water or another liquid and never place it under flowing
water.
25
EN
Publicité
