Sharp MD-MT45H Mode D'emploi page 121

Notes:
z Charge the battery within the range of 5°C - 35°C
(41°F - 95°F).
z Charging is completed when " " does not blink
when you plug in the AC adaptor and press the
MODE/CHRG button.
z The unit can be left in the charging state after it is
completed.
z Setting the volume level to "0" whilst recording with the
rechargeable or an alkaline battery reduces the bat-
tery drain.
z When you do not use the unit for hours, remove the
battery. (The battery drains gradually even when the
power is turned off.)
Caution:
z Use the specified battery AD-N70BT only. Do not
charge a battery (nickel-cadmium, alkaline, etc.) other
than that specified.
z Do not remove the outer cover of the re-
chargeable battery. It may cause heat gen-
eration, fire, or explosion.
z Do not dip the battery in water, do not dis-
pose of it in a fire, and do not take it apart.
z If the rechargeable battery terminal is dirty, charging
may not start. In such a case, wipe off the dirt with a
dry cloth.
z Do not disassemble the battery.
„ AC power
1
Connect the lead from the AC adaptor to the DC
IN 5V socket on the unit.
2
Plug the AC adaptor into an AC socket.
Notes:
z When there is thunder or lightning in your vicinity,
unplug the AC adaptor from the AC socket.
z When the unit is not in use for extended periods,
remove the AC adaptor from the AC socket.
z Never use an AC adaptor other than the one specified.
Otherwise, problems or serious hazards may be cre-
ated.
z Do not bend, twist or tie the power lead or put heavy
objects on top of it.
z Be sure to hold the plug when removing it. If you pull
on the lead, it may break, or the unit may malfunction.
z If power failure occurs whilst playing a disc using the
AC adaptor, disconnect it from the wall socket. Other-
wise, playback may start automatically when electricity
resumes.
ENGLISH
00/12/27 E_45SEEG_4.fm
E-26