Urmet 1092/281M Guide Rapide page 4

ENGLISH
INSTALLATION

Make sure that no units are powered before starting the installation procedure.

Unscrew the fixing base from the ring lock to separate the camera, as in figure.

Fix the base to the surface with 4 screws. If it is not planned an hidden installation of connection
cables, use the slot present on the base to draw out the connection cables present on the camera
body, without pinching them, in order to avoid malfunction.

Bring the cover near the fixing base and screw the ring lock to the fixing base without tightening.

Adjust the camera slant as regards the desired image capture point.

Connect the video output to the utility.

Power the camera.

Adjust the lens to frame the required images.
Focus adjustment

Turn the ZOOM adjustment screw (Ⓒ), clockwise or anticlockwise, to move the subject closer or
away.

Turn the focus adjustment screw (Ⓓ), clockwise or anticlockwise, to adjust focus of nearby or faraway
subjects.
4
Protective
dome
N
Ⓓ
T
Mount fixing screw
Camera body
∞
ZOOM adjustment
W
Ⓒ
DS1092-538